imx-test-3.0.35-4.1.0/test/mxc_pmic_test/pmic_testapp_light/pmic_testapp_light.c File Reference

This is the main file of PMIC tests for Light and Backlight driver. More...

Functions
void	enable_backlight (int fp, t_bklit_setting_param *setting)
void	disable_backlight (int fp, t_bklit_setting_param *setting)
int	start_fun_pattern (int fp, t_tcled_enable_param *tcled_setting, t_fun_param *fun_param)
int	run_backlight_test (int fp, t_bklit_setting_param *setting)
int	run_suite_backlight_test (int fp, t_bklit_setting_param *setting)
int	backlight_test (int fp, t_bklit_setting_param *setting)
int	fun_light_test (int fp, t_tcled_enable_param *tcled_setting, t_fun_param *fun_param)
int	run_ind_light_test (int fp, t_tcled_enable_param *tcled_setting, t_tcled_ind_param *ind_param)
void	ind_reset (t_tcled_ind_param *ind_param)
int	ind_light_test (int fp, t_tcled_enable_param *tcled_setting, t_tcled_ind_param *ind_param)

---

Detailed Description

This is the main file of PMIC tests for Light and Backlight driver.

---

Function Documentation

int backlight_test	(	int	fp,
		t_bklit_setting_param *	setting
	)

This is the main test for the backlight.

Parameters:

	fp	the file pointer
	setting	the backlight setting

Returns:

This function returns 0 if successful.

References t_bklit_setting_param::abms, t_bklit_setting_param::abr, t_bklit_setting_param::channel, t_bklit_setting_param::current_level, t_bklit_setting_param::cycle_time, disable_backlight(), t_bklit_setting_param::duty_cycle, t_bklit_setting_param::edge_slow, t_bklit_setting_param::en_dis, t_bklit_setting_param::mode, run_backlight_test(), run_suite_backlight_test(), and t_bklit_setting_param::strobe.

void disable_backlight	(	int	fp,
		t_bklit_setting_param *	setting
	)

This function disable backlights Main, Aux and Keypad

Parameters:

tcled_setting

the tcled setting

Returns:

This function returns a void

References t_bklit_setting_param::channel, t_bklit_setting_param::current_level, t_bklit_setting_param::cycle_time, t_bklit_setting_param::duty_cycle, t_bklit_setting_param::edge_slow, t_bklit_setting_param::mode, and t_bklit_setting_param::strobe.

Referenced by backlight_test().

void enable_backlight	(	int	fp,
		t_bklit_setting_param *	setting
	)

This function enable backlights Main, Aux and Keypad

Parameters:

tcled_setting

the tcled setting

Returns:

This function returns a void

References t_bklit_setting_param::abms, t_bklit_setting_param::abr, t_bklit_setting_param::channel, t_bklit_setting_param::current_level, t_bklit_setting_param::cycle_time, t_bklit_setting_param::duty_cycle, t_bklit_setting_param::edge_slow, t_bklit_setting_param::en_dis, t_bklit_setting_param::mode, and t_bklit_setting_param::strobe.

int fun_light_test	(	int	fp,
		t_tcled_enable_param *	tcled_setting,
		t_fun_param *	fun_param
	)

This is the suite test for the fun pattern. It checks that the read/write operation are coherent. Tester has to check the pattern

Parameters:

	fp	the file pointer
	tcled_setting	the tcled setting
	fun_param	the fun parameter

Returns:

This function returns 0 if successful.

References t_fun_param::bank, t_tcled_enable_param::bank, t_tcled_enable_param::mode, and t_fun_param::pattern.

int ind_light_test	(	int	fp,
		t_tcled_enable_param *	tcled_setting,
		t_tcled_ind_param *	ind_param
	)

This is the suite test for the tcled ind pattern. It checks that the read/write operation are coherent.

Parameters:

	fp	the file pointer
	tcled_setting	the tcled setting
	ind_param	the tcled ind parameter

Returns:

This function returns 0 if successful.

References t_tcled_enable_param::bank, t_tcled_ind_param::channel, ind_reset(), t_tcled_ind_param::level, t_tcled_enable_param::mode, t_tcled_ind_param::pattern, and run_ind_light_test().

void ind_reset

(

t_tcled_ind_param *

ind_param

)

It reset int_param struct

Parameters:

	fp	the file pointer
	tcled_setting	the tcled setting
	ind_param	the tcled ind parameter

Returns:

This function returns 0 if successful.

References t_tcled_ind_param::channel, t_tcled_ind_param::half_current, t_tcled_ind_param::level, t_tcled_ind_param::pattern, t_tcled_ind_param::rampdown, t_tcled_ind_param::rampup, and t_tcled_ind_param::skip.

Referenced by ind_light_test().

int run_backlight_test	(	int	fp,
		t_bklit_setting_param *	setting
	)

This is the unit test for the backlight.

Parameters:

	fp	the file pointer
	tcled_setting	the tcled setting
	fun_param	the fun parameter

Returns:

This function returns 0 if successful.

References t_bklit_setting_param::abms, t_bklit_setting_param::abr, t_bklit_setting_param::channel, t_bklit_setting_param::current_level, t_bklit_setting_param::cycle_time, t_bklit_setting_param::duty_cycle, t_bklit_setting_param::edge_slow, t_bklit_setting_param::en_dis, t_bklit_setting_param::mode, and t_bklit_setting_param::strobe.

Referenced by backlight_test(), and run_suite_backlight_test().

int run_ind_light_test	(	int	fp,
		t_tcled_enable_param *	tcled_setting,
		t_tcled_ind_param *	ind_param
	)

This is the unit test for the tcled ind pattern. It checks that the read/write operation are coherent.

Parameters:

	fp	the file pointer
	tcled_setting	the tcled setting
	ind_param	the tcled ind parameter

Returns:

This function returns 0 if successful.

References t_tcled_enable_param::bank, t_tcled_ind_param::channel, t_tcled_ind_param::level, t_tcled_ind_param::pattern, t_tcled_ind_param::rampdown, and t_tcled_ind_param::rampup.

Referenced by ind_light_test().

int run_suite_backlight_test	(	int	fp,
		t_bklit_setting_param *	setting
	)

This is the suite test for the backlight.

Parameters:

	fp	the file pointer
	setting	the backlight setting

Returns:

This function returns 0 if successful.

References t_bklit_setting_param::channel, t_bklit_setting_param::current_level, t_bklit_setting_param::cycle_time, t_bklit_setting_param::duty_cycle, t_bklit_setting_param::edge_slow, and run_backlight_test().

Referenced by backlight_test().

int start_fun_pattern	(	int	fp,
		t_tcled_enable_param *	tcled_setting,
		t_fun_param *	fun_param
	)

This function start a specific fun pattern

Parameters:

	fp	the file pointer
	tcled_setting	the tcled setting
	fun_param	the fun parameter

Returns:

This function returns 0 if successful.

References t_tcled_enable_param::bank, t_fun_param::bank, and t_tcled_enable_param::mode.